2008 Manugraph DGM 430 (6) Tower Press System 22.75" Cutoff

2008 Manugraph DGM 430 (6) Tower Press System

22.75″ (578mm) cutoff x 35″ (889mm) Width

Equipped with:

- (8) Ebway Jardis Splicers
- (2) Jardis Infeed Compensator Sections
- (6) Manugraph DGM 430 4-High Printing Towers
- 1 tower manufactured and purchased in 2004
- 2 towers manufactured and purchased in 2006
- 1 tower manufactured and purchased in 2008
- 2 supplementary towers purchased in 2014, refurbished, and manufactured in 2008.
- (1) DGM 1035 1:2 jaw type folder with 1/4 fold
- (1) Goss SSC Folder with 1/4 fold
- Half fold products : 6 webs, upper and lower former
- Half fold products : 8 webs
- Quarter fold products : 6 webs
- Double-parallel fold products : 4 webs.
- Maximum speed : 25,000 PPH
- (3) Operator control stations 1 main, 2 secondary
- (1) Wamac TS300 Stacker
- (4) Teco 100 HP Motors and drives
- Optional Muller Martini Alphaliner Inserter
- c. 255M impressions

Standard Features:

- Calibrated lever style keys and swing down ink fountains
- Continuous dampener with variable speed water pick-up roller
- Slot gap plate lock up with center register pin
- Plate cylinder under cut of .008″, .012″ or .014″ (0.020mm, 0.030mm or 0.035mm)
- On-the-run adjustment of place cylinder circumferential register adjustment with calibrated movement of +/- .062 (1.57mm)
- On-the-run adjustment of place cylinder sidelay register movement +/- .125 (3.17mm)
- Manual running unit-to-unit register adjustment for stack units
- Blanket cylinder undercut of .018″ (2.05mm)
- Standard “T” bar blanket cylinder lock up
- Ink fountain roller with quick charge override
- Centralized lubrication block
- Heavy duty drive shaft with thomas coupling
- Top iron with manual compensator
- Contact type web break detector